Lim, W. H., Yap, Y. K., Chong, W. Y. & Ahmad, H. All-optical graphene oxide humidity sensors. Sensors 14, 24329–24337 (2014).
Google Scholar
Ghadiry, M. et al. Nano-anatase tio2 for high performance optical humidity sensing on chip. Sensors 16, 39 (2016).
Google Scholar
Jang, M., Yoon, C., Park, J. & Kwon, O. Evaluation of hazardous chemicals with material safety data sheet and by-products of a photoresist used in the semiconductor-manufacturing industry. Saf. Health Work 10, 114–121 (2019).
Google Scholar
Lin, A.Y.-C., Panchangam, S. C. & Lo, C.-C. The impact of semiconductor, electronics and optoelectronic industries on downstream perfluorinated chemical contamination in taiwanese rivers. Environ. Pollut. 157, 1365–1372 (2009).
Google Scholar
Wang, Y., Zhang, Z., Jiang, C. & Xu, T. Electrodialysis process for the recycling and concentrating of tetramethylammonium hydroxide (tmah) from photoresist developer wastewater. Ind. Eng. Chem. Res. 52, 18356–18361 (2013).
Google Scholar
Cruz, S. M. F., Rocha, L. A. & Viana, J. C. Printing technologies on flexible substrates for printed electronics. In Flexible electronics (IntechOpen, 2018).
Khirotdin, R. K., Hassan, N., Siang, H. H. & Zawahid, M. H. Printing and curing of conductive ink track on curvature substrate using fluid dispensing system and oven. Eng. Lett. 25, 3 (2017).
Hrehorova, E. et al. Gravure printing of conductive inks on glass substrates for applications in printed electronics. J. Display Technol. 7, 318–324 (2011).
Google Scholar
Ravasio, C. S., Hoath, S. D., Martin, G. D., Boltryk, P. & Dorrestijn, M. Meniscus motion inside a dod inkjet print-head nozzle. In NIP & Digital Fabrication Conference, vol. 2016, 348–352 (Society for Imaging Science and Technology, 2016).
Magdassi, S. The chemistry of inkjet inks (World scientific, Singapore, 2009).
Ishihara, T. & Matsubara, S. Capacitive type gas sensors. J. Electroceram. 2, 215–228 (1998).
Google Scholar
Endres, H.-E., Hartinger, R., Schwaiger, M., Gmelch, G. & Roth, M. A capacitive co2 sensor system with suppression of the humidity interference. Sens. Actuators B Chem. 57, 83–87 (1999).
Google Scholar
Lee, S. & Chang, M. Indoor air quality investigations at five classrooms. Indoor Air 9, 134–138 (1999).
Google Scholar
Ivanov, B., Zhelondz, O., Borodulkin, L. & Ruser, H. Distributed smart sensor system for indoor climate monitoring 10–11 (In KONNEX Scientific Conf., Mnchen, 2002).
Bender, F., Länge, K., Voigt, A. & Rapp, M. Improvement of surface acoustic wave gas and biosensor response characteristics using a capacitive coupling technique. Anal. Chem. 76, 3837–3840 (2004).
Google Scholar
Kim, J.-Y., Chu, C.-H. & Shin, S.-M. Issaq: An integrated sensing systems for real-time indoor air quality monitoring. IEEE Sens. J. 14, 4230–4244 (2014).
Google Scholar
Liu, Y., Cui, T. & Varahramyan, K. All-polymer capacitor fabricated with inkjet printing technique. Solid-State Electron. 47, 1543–1548 (2003).
Google Scholar
Tetelin, A., Pellet, C., Laville, C. & N’Kaoua, G. Fast response humidity sensors for a medical microsystem. Sens. Actuators, B Chem. 91, 211–218 (2003).
Google Scholar
Varghese, O. et al. Gas sensing characteristics of multi-wall carbon nanotubes. Sens. Actuators, B Chem. 81, 32–41 (2001).
Google Scholar
Van Gerwen, P. et al. Nanoscaled interdigitated electrode arrays for biochemical sensors. Sens. Actuators, B Chem. 49, 73–80 (1998).
Kitsara, M. et al. Single chip interdigitated electrode capacitive chemical sensor arrays. Sens. Actuators, B Chem. 127, 186–192 (2007).
Google Scholar
Endres, H.-E. & Drost, S. Optimization of the geometry of gas-sensitive interdigital capacitors. Sens. Actuators, B Chem. 4, 95–98 (1991).
Google Scholar
Hu, X. & Yang, W. Planar capacitive sensors-designs and applications. Sens. Rev. 30, 24–39 (2010).
Google Scholar
Oprea, A. et al. Temperature, humidity and gas sensors integrated on plastic foil for low power applications. Sens. Actuators, B Chem. 140, 227–232 (2009).
Google Scholar
Courbat, J., Kim, Y., Briand, D. & De Rooij, N. Inkjet printing on paper for the realization of humidity and temperature sensors. In 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, 1356–1359 (IEEE, 2011).
Quintero, A. V., Molina-Lopez, F., Mattana, G., Briand, D. & De Rooij, N. Self-standing printed humidity sensor with thermo-calibration and integrated heater. In 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII), 838–841 (IEEE, 2013).
Rivadeneyra, A. et al. Design and characterization of a low thermal drift capacitive humidity sensor by inkjet-printing. Sens. Actuators, B Chem. 195, 123–131 (2014).
Google Scholar
Molina-Lopez, F., Briand, D. & De Rooij, N. All additive inkjet printed humidity sensors on plastic substrate. Sens. Actuators, B Chem. 166, 212–222 (2012).
Sohrabi, C. et al. Impact of the coronavirus (COVID-19) pandemic on scientific research and implications for clinical academic training—A review. Int. J. Surg. 1(86), 57–63 (2021).
Snyder, G. J., Lim, J. R., Huang, C.-K. & Fleurial, J.-P. Thermoelectric microdevice fabricated by a mems-like electrochemical process. Nat. Mater. 2, 528–531 (2003).
Google Scholar
Li, L., Vilela, F., Forgie, J., Skabara, P. J. & Uttamchandani, D. Miniature humidity micro-sensor based on organic conductive polymer-poly (3, 4-ethylenedioxythiophene). Micro Nano Lett. 4, 84–87 (2009).
Google Scholar
Juhász, L. & Mizsei, J. Humidity sensor structures with thin film porous alumina for on-chip integration. Thin Solid Films 517, 6198–6201 (2009).
Murata, K. Super-fine ink-jet printing for nanotechnology. In Proceedings International Conference on MEMS, NANO and Smart Systems, 346–349 (IEEE, 2003).
Moya, A., Gabriel, G., Villa, R. & del Campo, F. J. Inkjet-printed electrochemical sensors. Current Opinion in Electrochemistry (2017).
Andersson, H. et al. Inkjet printed silver nanoparticle humidity sensor with memory effect on paper. IEEE Sens. J. 12, 1901–1905 (2011).
Google Scholar
Bariya, M. et al. Roll-to-roll gravure printed electrochemical sensors for wearable and medical devices. ACS Nano 12, 6978–6987 (2018).
Google Scholar
Jeong, H., Noh, Y. & Lee, D. Highly stable and sensitive resistive flexible humidity sensors by means of roll-to-roll printed electrodes and flower-like tio2 nanostructures. Ceram. Int. 45, 985–992 (2019).
Google Scholar
Reddy, A. et al. Gravure printed electrochemical biosensor. Proc. Eng. 25, 956–959 (2011).
Google Scholar
Khan, S., Ul-Islam, M., Ullah, M. W., Kim, Y. & Park, J. K. Synthesis and characterization of a novel bacterial cellulose-poly (3, 4-ethylenedioxythiophene)-poly (styrene sulfonate) composite for use in biomedical applications. Cellulose 22, 2141–2148 (2015).
Google Scholar
Lee, S., Hong, Y. & Shim, B. S. Biodegradable pedot: Pss/clay composites for multifunctional green-electronic materials. Adv. Sustain. Syst. 6, 2100056 (2021).
Kumar, R. P. & Abraham, A. Pvp-coated naringenin nanoparticles for biomedical applications-in vivo toxicological evaluations. Chem. Biol. Interact. 257, 110–118 (2016).
Google Scholar
Haider, A. & Kang, I.-K. Preparation of silver nanoparticles and their industrial and biomedical applications: A comprehensive review. Adv. Mater. Sci. Eng.https://doi.org/10.1155/2015/165257 (2015).
Roe, D., Karandikar, B., Bonn-Savage, N., Gibbins, B. & Roullet, J.-B. Antimicrobial surface functionalization of plastic catheters by silver nanoparticles. J. Antimicrob. Chemother. 61, 869–876 (2008).
Google Scholar
Gupta, A., Matsui, K., Lo, J.-F. & Silver, S. Molecular basis for resistance to silver cations in salmonella. Nat. Med. 5, 183–188 (1999).
Google Scholar
Morones, J. R. et al. The bactericidal effect of silver nanoparticles. Nanotechnology 16, 2346 (2005).
Google Scholar
Inglesby, M. & Zeronian, S. Direct dyes as molecular sensors to characterize cellulose substrates. Cellulose 9, 19–29 (2002).
Google Scholar
Han, J.-W., Kim, B., Li, J. & Meyyappan, M. Carbon nanotube based humidity sensor on cellulose paper. J. Phys. Chem. C 116, 22094–22097 (2012).
Google Scholar
Yin, Z., Huang, Y., Duan, Y. & Zhang, H. Electrohydrodynamic direct-writing for flexible electronic manufacturing (Springer, 2018).
Alcantara, G. & Andrade, C. A short review of gas sensors based on interdigital electrode. In 2015 12th IEEE International Conference on Electronic Measurement & Instruments (ICEMI), vol. 3, 1616–1621 (IEEE, 2015).
[ad_2]
Originally Appeared Here